제품소개
레벨스위치
ULS-53 / 초음파형
- 제조사 : Dinel, s.r.o
- 제조국 : Czech Republic
•마그네틱펜으로 세밀한 세팅가능
•LED표시기능
•방폭 옵션
제품사양
Technical specifications | ||
Measuring range 1) | ULS–53_–01–_ ULS–53_–02–_ ULS–53_–06–_ ULS–53_–10–_ ULS–53_–20–_ | ULS–53_–01–_ ULS–53_–02–_ ULS–53_–06–_ ULS–53_–10–_ ULS–53_–20–_ |
Supply voltage | ULS–53N–_ _–_ ULS–53Xi–_ _ –_–S | 18 ... 36 V DC 18 ... 30 V DC |
Current supply | ULS–53N–_ _ –_–P ULS–53_–_ _ –_–S | max. 12 mA disconnected 4 mA / connected 20 mA |
Current output
Voltage output | ULS–53N–_ _ –_–P
ULS–53_–_ _ –_–S | PNP transistor with an open collector (max. switch current 300 mA) two-state current switch 4 mA / 20 mA |
Resolution | < 1 mm | |
Accuracy (within the total range) | ULS–53_–01 in area0,1–0,2 m / 0,2–1,0 m ULS–53_–02; –06 ULS–53_–10; –20 | 0,3 % / 0,2 % 0,15 % 0,2 % |
Temperature error | max. 0,04% / K | |
Beam width (-3 dB) | ULS–53_–01–_ ; 02–_ ; 10–_ ULS–53_–06–_ ULS–53_–20–_ | 10° 14° 12° |
Ambient temperature range | ULS–53_–01–_ ; 02–_ ; 06–_ ULS–53_–10–_ ; 20–_ | -30 ... +70°C -30 ... +60°C |
Measuring period | ULS–53_–01–_ ; 02–_ ULS–53_–06–_ ULS–53_–10–_ ULS–53_–20–_ | 0,6 s 1,0 s 1,8 s 5,0 s |
Averaging | 4 measurement 3) | |
Short time temperature stress resistance | +90°C / 1 hod. | |
Max. operation overpressure (on transmission surface) | 0,1 MPa | |
Max. internal values 2) (for the Xi version only) | Ui=30 V DC; Ii=132 mA; Pi=0,99 W; Ci=370 nF; Li=0,9 mH | |
Failure indication | echo failure – basic mode echo failure – inverse mode level in dead zone 4) – basic mode level in dead zone 4) – inverse mode | 3,75 mA / 0 V 22 mA / 10,5 V 22 mA / 10,5 V 3,75 mA / 0 V |
Protection class | ULS-53_-__-_-_-_- T ULS-53_-__-_-_- G-M, L | IP67 |
ULS-53_-__-_-_- C-M, L | IP67 5) | |
ULS-53_-__-_-_- B-M, L ULS-53_-__-_-_- H-M, L | IP68 | |
Recommended cable | PVC 2 x 0,75 mm2 (3 x 0,5 mm2) | |
Maximal current output load resistance | at U = 24 V DC at U = 22 V DC at U = 20 V DC | Rmax= 270 Ω Rmax=180 Ω Rmax=90Ω |
Minimal voltage output load resistance | Rmin>1kΩ | |
Delay between supply power rise time and first measurement | ULS–53_–01–_ ; 02–_ ; 06–_ ULS–53_–10–_; 20–_ | 5 s 9 s |
Process connection | ULS–53_–01–_ ULS–53_–02–_ ULS–53_–06–_ ULS–53_–10–_ ULS–53_–20–_ | thread G ¾‘‘ thread G 1‘‘ thread G 1½‘‘ thread G 2¼‘‘ aluminium alloy flange |
Weight | ULS–53_–01–_ ULS–53_–02–_ ULS–53_–06–_ ULS–53_–10–_ ULS–53_–20–_ | 0,20 kg 0,20 kg 0,25 kg 0,65 kg 2,80 kg |
1) In case the level of bulk-solid materials is measured, the measurement range is reduced.
2) Allowed pressure range in the zone 0: 80 ... 110 kPa.
3) From the last six measurements are taken out extreme values MAX and MIN, then the remaining four measurement was performed arithmetic average.
4) Dead zone = blind zone = blocking zone.
5) Protection class IP68 can be achieved when a special connector is used.
ULS-53-dat-3.3
문의 031)243-1035
FAX 031)243-1025
sales@gms-korea.com