본문 바로가기 주메뉴 바로가기

제품소개

HOME > 제품소개 > Flow meter > 가스유량계

가스유량계

가스유량계

S450

  • 제조사 : SUTO iTEC Co. Limited
  • 제조국 : Germany
•Insertion Type
•가연성, 폭발성 가스 측정 가능(방폭인증)
•Fieldbus interface (HART, MODBUS)
•사이즈 : 1/2" - 12"
•외부설치용으로 적합
DOWNLOAD
제품목록

제품사양

 S450 Volumetric Flow Ranges

 Inch

 DN

 S-Range (m3/h)

 M-Range (m3/h)

 HS-Range (m³/h)

 ½”

 DN15

 0.2 ... 45.6

 0.4 ... 91.0

 0.48 ... 110

 ¾”

 DN20

 0.4 ... 89.1

 0.9 ... 178

 1.09 ... 215

 1”

 DN25

 0.6 ... 148

 1.2 ... 295

 1.82 ... 357

 1½”

 DN40

 1.5 ... 367

 2.9 ... 732

 4.36 ... 886

 2”

 DN50

 2.4 ... 600

 4.8 ... 1,198

 7.26 ... 1,450

 2½”

 DN65

 4.1 ... 1,027

 8.2 ... 2,049

 12.1 ... 2,480

 3”

 DN80

 5.7 ... 1,424

 11.4 ... 2,841

 16.9 ... 3,442

 4”

 DN100

 8.7 ... 2,183

 17.4 ... 4,357

 24.2 ... 5,275

 5”

 DN125

 20 ... 3,419

 38 ... 6,824

 45.9 ... 8,263

 6”

 DN150

 20 ... 4,930

 39 ... 9,839

 70.18 ... 11,913

 8”

 DN200

 35 ... 8,786

 70 ... 17,533

 106.48 ... 21,229

 10”

 DN250

 55 ... 13,744

 110 ... 27,429

 165.77 ... 33,210

 12”

 DN300

 79 ... 19,815

 158 ... 39,544

 239.58 ... 47,880

Stated measuring ranges under following conditions:  

• Standard flow in air

• Reference pressure: 1000 hpa reference temperature: +20 °c 

• At other standard conditions and in other gases Flow ranges are different and data are available on request.

• In larger pipe diameters flow can also be measured. 


 Measurement

 Flow

 Accuracy

 ±(1.5 % of reading + 0.3 % full scale)

 Selectable units

 m³/h, m³/min, l/min, l/s, cfm, kg/h, kg/min, kg/s

 Repeatability

 0.25 % o.RDG

 Sensor

 Thermal mass flow sensor

 Sampling rate

 3 samples / sec

 Turndown ratio

 200:1

 Response time (t90)

 0.5 sec

 Consumption

 Selectable units

 m³, ft³, l, kg

 Reference conditions

 Selectable conditions

 20 °C 1000 mbar (ISO1217), 0 °C 1013 mbar (DIN1343) freely adjustable



 Signal / Interface & Supply 

 Analog output

 Signal

 4 ... 20 mA (4-wire), isolated 

 Scaling

 0 ... max flow, freely adjustable

 Load

 Max. 400 Ohm

 Update rate

 Value updated ever 1 sec

 Pulse output

 

 Signal

 Switch output, normally open, max. 30 VDC, 200 mA

 Scaling

 1 pulse per consumption unit (selectable)

 Fieldbus

 Protocol

 Modbus/RTU, HART, M-Bus

 Supply

 Voltage supply

 16 ... 30 VDC

 Current consumption

 200 mA



 General data

 Configuration

 PC Software

 USB Service Kit + Software

 Display

 Integrated

 LCD

 Material

 

 Process connection

 Stainless steel 1.4404 (SUS 316L)

 Housing

 Al alloy

 Sensor

 Stainless steel 1.4404 (SUS 316L)

 Metal parts

 Stainless steel 1.4404 (SUS 316L)

 Miscellaneous

 Electrical connection

 Screw terminals

 Protection class

 IP67

 Approvals

 CE, RoHS, FCC, Ex-Options

 Process connection


 S450: G1/2” (ISO 228/1) 

 S452: Measuring section with R-thread or Flange

 Weight

 S450: 1.75 kg S452: 1.25 kg (without measuring section)

 Operating conditions

 

 Medium

 Air, N₂, O₂, CO₂ and other non corrosive gases

 Medium temperature


 S450: -40 ... +150 °C
 S452: -40 ... +100 °C 

 Medium humidity

 < 90 %, no condensation

 Operating pressure








 S450: 0 ... 1.6 MPa

     (applicable for option A1280) 

     0 ... 5.0 MPa

     (applicable for option A1279)*

 S452: 0 ... 4.0 MPa

 *For pressure above 1.5 MPa use the installation device 

   A530 1106 or A530 1113.

 Ambient temperature

 -40 ... +65 °C

 Storage temperature

 -30 ... +70 °C

 Transport temperature

 -30 ... +70 °C

 Pipe sizes


 S450: ½” ... 12” (bigger pipes on request) 

 S452: ½” ... 3”



문의 031)243-1035
FAX 031)243-1025
sales@gms-korea.com